Manufactured in Spokane, WA Since 1970 (509) 535-3015
Window Styles
1505 Series Fixed
1505 Series Awning/Hopper
1505 Series Casement
2 1/4" Frame Depth
1505 Series Casement
1505 Series Awning/Hopper
1505 Series Casement
2 1/4" Frame Depth
1505 Series Awning/Hopper
1505 Series Awning/Hopper
3500 Series Horizontal Slider
2 1/4" Frame Depth
3500 Series Horizontal Slider
3500 Series Horizontal Slider
3500 Series Horizontal Slider
3 3/8" Frame Depth
The interlocking mullion has been designed with a cam lock to provide maximum security.
Each vent features two adjustable wheels that roll on a track that is an integral part of the sill member to provide for smooth and quiet operation.
Minimum Rough Opening Dimension
Width - 24" Height - 12"
Minimum Egress Dimension
48 x 45 / 60 x 36
3502 Series Single Hung
3500 Series Horizontal Slider
3502 Series Single Hung
3 3/8" Frame Depth
Our Single Hung Slider provides all the features required for use in cold climate areas. Efficient insulated glazing in a thermally broke sash and frame, with a fully weatherstripped sash combine to reduce heating and cooling requirements.
Minimum Rough Opening
Width - 12" Height - 24"
Vent Heights
Minimum - 12" Maximum - 36"
Minimum Egress Dimensions
30 x 72 / 36 x 62 / 38 x 60
Finishes
Marlin offers both anodized and painted finishes in any available specification or color. Because custom colored windows require extended lead times for color selection, sample submittal, and production as well as additional cost for setup and minimum order quantities, Marlin recommends this as an option for larger projects that allow for added time.
Marlin inventories the two most popular anodized finishes - dark bronze and clear anodized for all of our window series. We also stock black anodized for our fixed, casements & awnings.
T.I.E. Technology
Extruded aluminum has proven over time to be the best material for long lasting, low maintenance commercial windows. Marlin Windows uses high quality aluminum alloys best suited for window applications. All Marlin windows use extruded exterior glass stops to allow matching anodized finishes and provide extra strength under negative window loads.
Marlin thermally improved extrusions are accomplished by placing a specially designed cavity in the extrusion that is filled with a high density polyurethane. The bottom side of the cavity is then debridged with a saw, resulting in two separate extrusions that are held together by the polyurethane "thermal barrier". This provides a higher resistance to heat loss and condensation.
Hardware
Roto Hardware
Project-In Handle
Push-Out Handle
For project-out vent. Mounted at vent bottom, it allows for approximately 10" of opening. The double arm design also helps achieve corner pull-in and vent stability.
High-pressure die-cast zinc case, crank handle and knob. Hardened steel worm and gear arm.
Push-Out Handle
Project-In Handle
Push-Out Handle
Bronzecraft standard push/pull & locking handle for casement and project-out windows.
Project-In Handle
Project-In Handle
Project-In Handle
Bronzecraft push/pull locking handle for operation of in-swing vents.
Locking Handle
Locking Handle
Project-In Handle
Allows for special key to lock or unlock.
Butt Hinge
Locking Handle
4-Bar Hinge
Cast bronze alloy exposed hinge is standard on casements with roto operators or push out hardware.
4-Bar Hinge
Locking Handle
4-Bar Hinge
Stainless steel self-balancing hinge. Standard for awnings, hoppers and inswing casements. Friction adjustment holds windows open at any position.
Friction Arm
Custodial Lock
Custodial Lock
Marlin's projected windows are balanced with either one or two heavy duty four bar friction hinges. Friction hinges are stainless steel and include a positive stop and an adjustable friction shoe.
Custodial Lock
Custodial Lock
Custodial Lock
Allows for control of vent operation. Requires a special key to lock or unlock.
Pole End
Custodial Lock
Pole End Handle
For opening or closing clerestory or high-mounted windows.
Pole End Handle
Pole End Handle
Pole End Handle
For clerestory or high-mounted project-In vents
Cam Lock
Pole End Handle
Cam Lock
Standard on single hung's and horizontal sliders.
Positive thumb operated sweep cam lock provides maximum security